Products

  • Copper cable clamp

    Copper cable clamp

    Electric cable accessory C shape copper pipe clamp is  used for lightning protection of building,conductor of the fastening and connection of the net work , made of the copper material  low resistivity is good electrical conductivity, good corrosion resistance and convenient installation,   specialized production, the price is competitive.  

  • Aluminum steel guy wire dead end guy grip strandvise

    Aluminum steel guy wire dead end guy grip strandvise

    GUY STRAND DEAD END, it is a cone-shaped accessory that is usually positioned at the bottom of the transmission poles.  Here it connects with the down guy wire. It is also used on the overhead lines where it is connected to the dead-end applications. Its primary function is to terminate the guy wire and the overhead cable.

    A strand vise is designed to attach onto the cable using a finger-trap principle. Here, a spring projects its jaws onto the cable hence setting the tool. The jaws are released to prevent them from sliding upwards.

    The good thing about strand vise is it does not have nuts for exerting torque onto the cables. This means that there is no need to compress it on the sleeve.

    The solid construction of the strand vise makes it reliable for a wide range of applications and also for different environments. It features galvanized steel which is not only strong but also protected from chemical destruction.

    GUY STRAND DEAD END can be used with different strands including alum weld, galvanized, aluminized, and EHS, steel strand.

    The guy strand dead end  design makes it compatible with a wide range of industrial strands. It can support a broad range of wires thanks to its universal bale design.

  • Aluminum hot line tap clamps

    Aluminum hot line tap clamps

    Description

    Hot-line clamps(hotline clamp are live line tools which used for line tap distribution connections.

    Feature

    1-Bronze alloy and aluminum alloy casting offer high strength, corrosion-resistance and conductor compatibility

    2-Extended jaw width means excellent conductor contact, reduced joint temperature,minimal conductor cold flow and reduced twisting of the conductor during installation

    3-Spring loaded feature compensates for cold flow and offsets tightening torque vibrations

    4-Spring loaded feature compensates for cold flow and offsets tightening torque vibrations

    4-Forged eyebolts provide corrosion free strength and uniformed expansion under loading

    5-The side positioned tap connection prevents possible corrosion of conductor or clamp on bimet connections

  • Hot Line Clamps

    Hot Line Clamps

    Copper Aluminium Hot Line Clamp

    Description:
    Hot Line Clamps are live line tools compatible for distribution tap connections.Bronze Alloy and Aluminum Alloy castings offer high strength, corrosion resistance, and conductor compatibility.
    Extended jaw width means excellent conductor contact, reduced joint temperature, minimal conductor cold flow and reduced twisting of the conductor during installation.Spring loaded feature compensates for cold flow and offsets tightening torque vibrations.Forged eye bolts provide corrosion free strength and uniformed expansion under loading.The side positioned tap connection prevents possible corrosion of conductor or clamp on bimetal connections.Successful Current Cycle testing per ANSI C119.4 provides assurances that the MPS hot line clamp will withstand the ampacity of a properly installed connection.

  • Copper connecting clamp T Type clamp

    Copper connecting clamp T Type clamp

    Material:99.9% Pure copper

    Surface:Tin Plated

    It is fixed by bolts and used in the connections between the electrical equipment with cable and the indoor distribution equipment

  • High voltage cable cleat

    High voltage cable cleat

    The product is made of high-strength anti-corrosive aluminum alloy to secure the placement of cables.It’s fixture structure is anchored by bolts.The retaining clip is compact,reasonable in conformation,easy and flexible for installation and does not do harm to the cable.

  • Ground rod

    Ground rod

    A ground rod is the most common type of electrode used for the grounding system. It provides a direct connection to the ground.  In doing so, they dissipate the electric current to the ground.  The ground rod significantly improves the overall performance of the grounding system.

    Ground rods are applicable in all types of electrical installations, as long as there is you are planning to have an effective grounding system, both at home and commercial installations.

    Ground rods are defined by specific levels of electric resistance. The resistance of the ground rod should always be higher than that of the grounding system.

    Even though it exists as a unit, a typical ground rod comprises of different components which are steel core, and copper coating. The two are bonded through an electrolytic process to form permanent bonds. The combination is perfect for the maximum current dissipation.

    Ground rods come in different nominal lengths and diameters. ½” is the most preferred diameter for the ground rods while the most preferred length for the rods is 10 feet.

     

  • Ground Rod Clamp

    Ground Rod Clamp

    Ground Rod Clamp

    A ground rod clamp is an underground electrical fitting that is used for connecting the bearing section of the ground rod to the ground cable. The rod ensures that the ground cable is properly grounded and the clamp comes in handy in completing this connection.

    The ground rod is made of forged heavy-duty steel to withstand vagaries of nature since it is exposed outside to the ground condition.

    Ground rod clamps come in different diameters. Your choice will depend on the diameter of the grounding conductor and the ground rod.

    The apt design of the ground rod clamp ensures that it establishes a stable and strong connection with both the ground rod and the ground cable. It achieves this goal without interfering with the functionality of the grounding cable.

  • Turnuckles With Eye Bolt And Hook Bolt

    Turnuckles With Eye Bolt And Hook Bolt

    Product Name: Turnuckles With Eye Bolt And Hook Bolt

    Material: Carbon Steel

    Surface Treatmnet:  Galvnized, Stainless Steel And Other Kind Of Surface Treatment.

    Specification: Customized

  • U Bolt

    U Bolt

    U bolt is also u bolt clamp,  or u clamp, just as the name suggests, this bolt for power and telecommunication line assumes a U-shape. Like other bolts for the electrical overhead line, U-shape is used for connecting dead end and even power line to the pole. It can be used on both the wooden and concrete poles.

    Although they are known as U bolt, they are not all the same. Instead, there are some slight variations in the way that they are designed.

  • Aluminum Alloy Preformed Dead End Guy Grip

    Aluminum Alloy Preformed Dead End Guy Grip

    Aluminum Alloy Preformed Dead End Guy Grip with Insulation Coating(SNAL) is for fixing terminals of the ground wire of overhead lines.

    The guy-grip dead end clamp for conductor can be applied to bear strain on overhead bared or insulated covered conductors in transmission & distribution lines.
    It’s the substitutes of the traditional dead end clamps such as bolted type, compression type and wedge type.

    Aluminum alloy dead end grip with insulation coating for telecom cable, insulator conductor, fiber cable, TV cable, Digital cable

    The aluminum alloy dead end grip with insulation coating has the main function to fix a pole/tower the cables, conductors, strands, structures

    The area of the loop always must be protect with a suitable thimble, pulley, insulator etc. Preformed line material:  Aluminum clad steel wire or galvanized steel wire.

    Aluminum Alloy Helical Preformed Dead End Guy Grip with Insulation Coating(SNAL) is for fixing terminals of the ground wire of overhead lines.

     

  • Wedge Connector Crimp tools

    Wedge Connector Crimp tools

    Type & Specifications ● USe for installing JXL series wedge Connector : JXL1, JXL-2. JXL-3,JXL-4, ● JXL-small for JXL-1,XL-2 “C”sharp wedge connector ● JXL-big for JXL-3,JXL-4 “C”sharp wedge connector Estructuraa   1. fixed handle     2. Free handle       3 .Cylinder body           4.Oil Pump 5.Pivot Screw     6.Unloading Device   7.Clamping head      8.Pision Directions 1.According to the connector “C” of the body of the wedge point the type of tools. JXL-1, JXL-2 must ...